50m CAT5e UTP Copper Ethernet Cable

50m CAT5e UTP Copper Ethernet Cable


Categories: ,


CAT5e UTP Bare Copper Ethernet Cable
Length 50m
UTP: Unshielded Twisted Pair
Conductor: Solid Bare Copper
Outer Cable Diameter: 5.22mm
Outer Core Cable Diameter: 0.80mm (Inner 0.49mm)
Drain Wire: 0.4mm (CCA)
Insulation: HDPE
Impedance (1 to 100MHz): 100±15 ohms
Capacitance 1kHz: 56pF/km
Conductor DC Resistance @ 20°C: 94 ohms/km
Impedance: 100 ohms
Return Loss: 20dB (1-100MHz)
Connector type:
RJ45 8 Pin Connector
Need to use an RJ45 Crimping Tool
Jacket Colour: Grey
Used in conjunction RJ45 connectors & a crimping tool for:
Building Local Area Networks (LANs) for connecting computers, printers etc into a network
Connecting the ethernet port on a satellite receiver to the internet
Connecting IP security cameras back to a router
The RJ stands for ‘Registered Jack’
The RJ11 comes with 4 pin slots
Only the 2 middle pins are needed
It is used for dial up internet or voice but not broadband
it is used with telephone cables
If the RJ connector has copper pins in all 4 slots
it is actually an RJ14 but can be used as if it was an RJ11
The other commonly used RJ plug is the RJ45
it is used with LAN networks, ethernet ports etc
it has 8 pins
It is used with CAT5 Cable